Thursday, January 31, 2008

Re: [asterisk-biz] Futures of the telecoms business.

Matthew Rubenstein wrote:

> Lewis says telcos don't innovate and always accidentally caught up with
> outside innovation, that telcos act like they've got a "god given right"
> to make profits just because they've invested money in networks. That IP
> "telephony" is really beyond telephony into "the future of
> communications", that the IP convergence is where new money will come
> from as voice and SMS profits decline. That there's huge new
> opportunities that telcos aren't able to even think about tapping, or
> care about until others show how. That voice is about to change after
> 100 years, in combination with some other info, the huge oppportunity.

On the other side, there are a lot of CLECs, ITSPs and small independent
ISPs that seem to feel they have a "god given right" to make profits
despite _not_ having invested in networks, build-out, or any kind of
value-creating CAPEX other than resale infrastructure...

Don't get me wrong, I like this category of the industry, I'm
fundamentally on their side. But it still bears pointing out.

--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] NPA-NXX to City, State Database

henry@henrythebig.com wrote:

> We purchase a LERG database from Telecordia (updates not super accurate, you will need to purchase access to porting database)

Do you know something I don't? Access to "porting database" (NPAC) is
not simply or easily or cheaply obtained from Neustar, especially if you
are not a carrier. This applies to their LNPoIP (chiefly over ENUM)
"SIP-IX" product too.

In my case, I would've had to sign NDAs with the seven NPAC territories,
pay a setup fee of about $2500, and have a monthly commitment of about
$250 dips @ $.003/dip. Also, I would need to present evidence of
general commercial liability insurance with policy limits at somewhere
over a million (I don't quite remember) plus worker's comp insurance
where applicable.

Needless to say, that's going to be a no-go.

--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

[asterisk-biz] Looking for Ethiopian satellite internet sales agent

Hi All,

I'm looking for agent  to sell satellite internet to Ethiopian customer like farm or NGO or international compaines.

Thanks,

John.

Re: [asterisk-biz] NPA-NXX to City, State Database

peter,

I understand that cole technical was getting ready to launch a CNAM service... you might want to check them out and see if it is up...
daveC

TVaught@ColeTechnical.com




henry@henrythebig.com wrote:
We purchase a LERG database from Telecordia (updates not super accurate, you will need to purchase access to porting database) with details about DID location. I know for sure, dsl providers use the same because we got the length of cable from home outlet to CO. Billing Concepts has a similar product and you pay per query and you get actual location (full address). Hope will help,  Chris Hariga    Sent from my BlackBerry® wireless device  -----Original Message----- From: Bill Michaelson <bill@cosi.com>  Date: Thu, 31 Jan 2008 19:07:14  To:Commercial and Business-Oriented Asterisk Discussion<asterisk-biz@lists.digium.com> Subject: Re: [asterisk-biz] NPA-NXX to City, State Database   It is just you. If you operated a pizzeria in Port Richmond, and an  incoming call indicated Mariners Harbor, you would be prepared to make a  delivery. If it was from Chelsea, you would not. And if it indicated  NYC, you would consider that info almost useless.  Nitzan Kon wrote:   
Maybe it's just me, but if it's 212, 347, or 646 - as a consumer I don't really care where the LATA is physically located. It's all "NYC" in my book. ;)    -- Nitzan   _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com--  asterisk-biz mailing list To UNSUBSCRIBE or update options visit:    http://lists.digium.com/mailman/listinfo/asterisk-biz         
 _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com--  asterisk-biz mailing list To UNSUBSCRIBE or update options visit:    http://lists.digium.com/mailman/listinfo/asterisk-biz _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com--  asterisk-biz mailing list To UNSUBSCRIBE or update options visit:    http://lists.digium.com/mailman/listinfo/asterisk-biz      

--  My wife's sister is in California.   I should buy her a Videophone2008!  Truly, The Next Best Thing to Being There! --  WorldWideVideoPhones.com 856.380.0894   

Re: [asterisk-biz] NPA-NXX to City, State Database

Oh yeah- I always forget those exist too. ;)
(ok ok, I haven't been living in NYC *that* long...)

--- C F <shmaltz@gmail.com> wrote:

> What about 917 and 718?


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] NPA-NXX to City, State Database

So what you're saying is - if you owned a pizzeria in Port Richmond,
but someone called you from a cellphone indicating NYC (or out of state
for that matter), you wouldn't deliver? (of course you would, you'd
just be more cautious about it the first time they call)

While I understand your logic, as an end user I don't really care if my
phone number is of use to a local pizzeria or not. While living in
Queens I've made countless local orders with a cellphone based in Texas
and VoIP numbers based in Manhattan. Sure, businesses you call raise an
eyebrow, but none of them make a big deal out of it. (either way, in
the coming years they'll have to get used to all sorts of phone numbers
anyway as VoIP gets more popular...)

--- Bill Michaelson <bill@cosi.com> wrote:

> It is just you. If you operated a pizzeria in Port Richmond, and an
> incoming call indicated Mariners Harbor, you would be prepared to
> make a
> delivery. If it was from Chelsea, you would not. And if it indicated
> NYC, you would consider that info almost useless.
>
> Nitzan Kon wrote:
> > Maybe it's just me, but if it's 212, 347, or 646 - as a consumer I
> > don't really care where the LATA is physically located. It's all
> "NYC"
> > in my book. ;)
> >
> > -- Nitzan
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-biz mailing list
> > To UNSUBSCRIBE or update options visit:
> >

http://lists.digium.com/mailman/listinfo/asterisk-biz
> >
> >
> > _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] NPA-NXX to City, State Database

We purchase a LERG database from Telecordia (updates not super accurate, you will need to purchase access to porting database) with details about DID location. I know for sure, dsl providers use the same because we got the length of cable from home outlet to CO.
Billing Concepts has a similar product and you pay per query and you get actual location (full address).
Hope will help,

Chris Hariga

Sent from my BlackBerry® wireless device

-----Original Message-----
From: Bill Michaelson <bill@cosi.com>

Date: Thu, 31 Jan 2008 19:07:14
To:Commercial and Business-Oriented Asterisk Discussion<asterisk-biz@lists.digium.com>
Subject: Re: [asterisk-biz] NPA-NXX to City, State Database


It is just you. If you operated a pizzeria in Port Richmond, and an
incoming call indicated Mariners Harbor, you would be prepared to make a
delivery. If it was from Chelsea, you would not. And if it indicated
NYC, you would consider that info almost useless.

Nitzan Kon wrote:
> Maybe it's just me, but if it's 212, 347, or 646 - as a consumer I
> don't really care where the LATA is physically located. It's all "NYC"
> in my book. ;)
>
> -- Nitzan
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] NPA-NXX to City, State Database

What about 917 and 718?

On Jan 31, 2008 6:45 PM, Nitzan Kon <nk3569@yahoo.com> wrote:
> Maybe it's just me, but if it's 212, 347, or 646 - as a consumer I
> don't really care where the LATA is physically located. It's all "NYC"
> in my book. ;)
>
> -- Nitzan
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] NPA-NXX to City, State Database

Well, Queens (http://en.wikipedia.org/wiki/Queens) is what it's
commonly called and it's the county. The USPS will usually use town
names (i.e. Flushing, NY) for towns within Queens, so will people that
live there.
When I make a phone call to Queens I will see on my bill the same
towns the USPS uses.


On Jan 31, 2008 4:59 PM, Peter Beckman <beckman@angryox.com> wrote:
> OK, So I have the LERG. It's ugly. NWYRCYZN02 is not pretty. Neither is
> "NEW YORK METRO NY". Some entries state "BROOKLYN" or "QUEENS" or
> something else. I want an NPA-NXX database that corresponds to a valid
> USPS City, State.
>
> What do YOU use to tell your customers who do not understand what a rate
> center is WHERE a DID/DDI is "located?" Is there a database other than the
> LERG you rely on? Who has the best and most accurate data? _IS_ there a
> source of accurate data?
>
> The biggest problem I have is that for large metro areas, New York, NY for
> example, it covers a lot of territory. If "Bronx, NY" is a valid city,
> state combo for the USPS, it's good for me. But there is no Queens, NY
> that I can find. Queens is a county, (queens village and queensbury, ny do
> exist), but not a city like Bronx.
>
> Did you know that Manhattan, NY and Queens, NY do NOT exist according to
> the USPS, but Staten Island, Bronx and Brooklyn, NY do? Talk about
> confusion.
>
> Beckman
> ---------------------------------------------------------------------------
> Peter Beckman Internet Guy
> beckman@angryox.com

http://www.angryox.com/
> ---------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Distributed Call Center -- Please Help define

On Jan 31, 2008 6:58 PM, Naveed Nazir <naveed_nazir@yahoo.com> wrote:
>
> I have an opportunity to bid for setting up and management of a distributed
> call center. The client plans to grow to 1000 seats between multiple
> locations.
>
> Can some one guide me to the solutions available out there (commercial &
> open source). I would also like to hear about your good or bad experiences
> with a particular solution, or their known quirks.
>
> What kind of numbers are we talking about. What would the team recommend as
> a good distributed architecture.
>
> Are there any providers of 800 toll free service that can take the call
> nationally, then make a SIP or SS7 querry to our database engine and
> terminate to a dynamically assigned number anywhere in the country using our
> response. Ideally, we would like to be in the media stream for monitoring /
> recording / quality control purposes.
>
> Feel free to contact me offlist with any proposals.
> Thanks for your help in advance.
> Naveed
>


If I were you, I would build it myself, but I am not and never will be.

I suggest you partner up with UCN and their InContact product if you
need to do this somewhat quickly and do not have the skillset or
ability to hire the resources to make it happen yourself.

For anyone that wants ideas on a cool Asterisk GUI, take a look at
some of their demos.

Thanks,
Steve Totaro

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] NPA-NXX to City, State Database

It is just you. If you operated a pizzeria in Port Richmond, and an
incoming call indicated Mariners Harbor, you would be prepared to make a
delivery. If it was from Chelsea, you would not. And if it indicated
NYC, you would consider that info almost useless.

Nitzan Kon wrote:
> Maybe it's just me, but if it's 212, 347, or 646 - as a consumer I
> don't really care where the LATA is physically located. It's all "NYC"
> in my book. ;)
>
> -- Nitzan
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>

[asterisk-biz] Distributed Call Center -- Please Help define

I have an opportunity to bid for setting up and management of a distributed call center. The client plans to grow to 1000 seats between multiple locations.

Can some one guide me to the solutions available out there (commercial & open source). I would also like to hear about your good  or bad experiences with a particular solution, or their known quirks.

What kind of numbers are we talking about. What would the team recommend as a good distributed architecture.

Are there any providers of 800 toll free service that can take the call nationally, then make a SIP or SS7 querry to our database engine and terminate to a dynamically assigned number anywhere in the country using our response. Ideally, we would like to be in the media stream for monitoring / recording / quality control purposes.

Feel free to contact me offlist with any proposals.
Thanks for your help in advance.
Naveed





Looking for last minute shopping deals? Find them fast with Yahoo! Search.

Re: [asterisk-biz] NPA-NXX to City, State Database

Maybe it's just me, but if it's 212, 347, or 646 - as a consumer I
don't really care where the LATA is physically located. It's all "NYC"
in my book. ;)

-- Nitzan


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] NPA-NXX to City, State Database

I can't help you with LERG DB lookups. But I'm a New Yorker. I can tell
you that the only literal *city* here is "New York, NY", though
sometimes called "New York City, NY". It's composed of 5 boros (how we
spell "boroughs"), which are municipal subdivisions that are also state
counties. Inside each county are neighborhoods that sometimes were
legally independent cities before being amalgamated into some other
city, as Flatbush was into Brooklyn, before that city was amalgamated
into NYC sometime in the past few centuries, so the USPS (and Google,
and others) recognize "cities" like "Queens Village", even though
they're not cities. The boros don't all have the same name as the county
to which they are equivalent: "Brooklyn" is "Kings County", "Manhattan"
is "New York County", "Staten Island" is "Richmond County", but the
Bronx and Queens are "Bronx County" and "Queens County", respectively.

To be completely pedantic, Manhattan is the only boro that is not
exactly the same as the geographic area with its name. Marble Hill used
to be part of Manhattan Island until we straightened the S-shaped Harlem
River, leaving one lobe attached to the Bronx but severed from the
island. Manhattan of course refused to give up the real estate, so it's
still part of New York County.


On Thu, 2008-01-31 at 16:59 -0500, Peter Beckman wrote:
> OK, So I have the LERG. It's ugly. NWYRCYZN02 is not pretty. Neither is
> "NEW YORK METRO NY". Some entries state "BROOKLYN" or "QUEENS" or
> something else. I want an NPA-NXX database that corresponds to a valid
> USPS City, State.
>
> What do YOU use to tell your customers who do not understand what a rate
> center is WHERE a DID/DDI is "located?" Is there a database other than the
> LERG you rely on? Who has the best and most accurate data? _IS_ there a
> source of accurate data?
>
> The biggest problem I have is that for large metro areas, New York, NY for
> example, it covers a lot of territory. If "Bronx, NY" is a valid city,
> state combo for the USPS, it's good for me. But there is no Queens, NY
> that I can find. Queens is a county, (queens village and queensbury, ny do
> exist), but not a city like Bronx.
>
> Did you know that Manhattan, NY and Queens, NY do NOT exist according to
> the USPS, but Staten Island, Bronx and Brooklyn, NY do? Talk about
> confusion.
>
> Beckman
> ---------------------------------------------------------------------------
> Peter Beckman Internet Guy
> beckman@angryox.com

http://www.angryox.com/
> ---------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
--

(C) Matthew Rubenstein


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] NPA-NXX to City, State Database

www.localcallingguide.com is great, but you can't internalise the
database, just use it on a per-incident basis really. Unless you want to
work out some sort of deal with them to batch queries to their XML query
interface as part of an OSS system I suppose.

On Thu, 31 Jan 2008, Peter Beckman wrote:

> OK, So I have the LERG. It's ugly. NWYRCYZN02 is not pretty. Neither is
> "NEW YORK METRO NY". Some entries state "BROOKLYN" or "QUEENS" or
> something else. I want an NPA-NXX database that corresponds to a valid
> USPS City, State.
>
> What do YOU use to tell your customers who do not understand what a rate
> center is WHERE a DID/DDI is "located?" Is there a database other than the
> LERG you rely on? Who has the best and most accurate data? _IS_ there a
> source of accurate data?
>
> The biggest problem I have is that for large metro areas, New York, NY for
> example, it covers a lot of territory. If "Bronx, NY" is a valid city,
> state combo for the USPS, it's good for me. But there is no Queens, NY
> that I can find. Queens is a county, (queens village and queensbury, ny do
> exist), but not a city like Bronx.
>
> Did you know that Manhattan, NY and Queens, NY do NOT exist according to
> the USPS, but Staten Island, Bronx and Brooklyn, NY do? Talk about
> confusion.
>
> Beckman
> ---------------------------------------------------------------------------
> Peter Beckman Internet Guy
> beckman@angryox.com

http://www.angryox.com/
> ---------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>

--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : +1-678-954-0670
Direct : +1-678-954-0671

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

[asterisk-biz] NPA-NXX to City, State Database

OK, So I have the LERG. It's ugly. NWYRCYZN02 is not pretty. Neither is
"NEW YORK METRO NY". Some entries state "BROOKLYN" or "QUEENS" or
something else. I want an NPA-NXX database that corresponds to a valid
USPS City, State.

What do YOU use to tell your customers who do not understand what a rate
center is WHERE a DID/DDI is "located?" Is there a database other than the
LERG you rely on? Who has the best and most accurate data? _IS_ there a
source of accurate data?

The biggest problem I have is that for large metro areas, New York, NY for
example, it covers a lot of territory. If "Bronx, NY" is a valid city,
state combo for the USPS, it's good for me. But there is no Queens, NY
that I can find. Queens is a county, (queens village and queensbury, ny do
exist), but not a city like Bronx.

Did you know that Manhattan, NY and Queens, NY do NOT exist according to
the USPS, but Staten Island, Bronx and Brooklyn, NY do? Talk about
confusion.

Beckman
---------------------------------------------------------------------------
Peter Beckman Internet Guy
beckman@angryox.com

http://www.angryox.com/
---------------------------------------------------------------------------

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] USB Conference Phone for 29.99

Sam Tam wrote:
> We are now doing a special promotional offer on a new USB Conference Phone.
> This is guaranteed the ONLY USB Conference Phone available.
I have another one made by us robotics, what did i win ? :)

Zoa
> We also accept
> bulk order and for custom logo to be put on the phone.
>
> For more info please email us back.
>
> Feature:
> 1. Ideal for group conference, free internet call and music enjoyment.
> 2. Due to 48KHz sample rate, presenting CD-quality music and high fidelity
> sound.
> 3. HI-FI amplifier and high-quality speaker.
> 4. Full-duplex conversation, crystal clear voice.
> 5. DSP built-in for echo cancellation and noise reduction.
> 6. Adjustable volume and mute control.
> 7. Convenient for private conversations with ear-phone.
> 8. Ideal for travel because of small size and light weight.
> 9. USB 1.0 & 2.0 compatible, No driver required.
> 10. Mac and PC compatible.
> 11. Supporting all softphone, like Skype, MSN, Yahoo messenger, AOL, Vonage
> and VoIPBuster .
> Hardware:
> 1. No external power required.
> 2. USB power and mute microphone LED indicator.
> 3. Volume+, volume-, mute speaker and microphone buttons.
> 4. Driver and sound card built-in.
>
> Interface:
> 1. One USB interface to PC.
> 2. One Headset jack.
> System requirement:
> 1. Windows 2000, XP or Vista .
> 2. 400 MHz processor and free USB1.1 or USB2.0 port .
> 3. 128 MB RAM and 15 MB free disk space.
> 4. Internet Connection (33.6 Kbps modem, or any broadband: cable, ADSL.)
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Starting a VOIP Business

Gondar Monn wrote:
> Thanks Senad ! Looks like your maxirack solution will be a good start .
> I saw on the picture that no card is provided ... Does it have a PCI
> express port ? (the TE420 is PCI express).
sure.. it has 6 PCI slots, 3xPCIe, 3xPCIx

> I am downloading the vmware image to take a peek
>
> Thanks
>
> Gondar
>
> Can we talk off-list ?

sure..

senad at bicomsystems dot com


Senad


>
>
> Senad Jordanovic wrote:
>> Gondar Monn wrote:
>>
>>> Thanks for your willingness to help ......
>>> @ Pilosov, we got the PRI lines + the TE420. We are now looking for the
>>> best machine that could handle the supposedly 120 calls and maybe more
>>> .... + the hosted PBX
>>>
>>> @Balashov, we are a WISP and provide internet access to remote areas, we
>>> want to offer our subscribers phone services too. Either DID
>>> origination or SIP phones, plus hosted PBX .... What other alternative
>>> would you propose instead of Asterisk ? For billing, we would go for
>>> monthly prepaid ...
>>>
>>> The main thing right now, is the server that would handle the
>>> services... any suggestions ?
>>>
>> Hi
>>
>> We got exactly same type of business type running:
>> - multi tenant PBXware:
>> http://www.bicomsystems.com/products/C/P/798/154_3672/
>>
>> on top of high availability servers solution, SERVERware:
>> http://www.bicomsystems.com/products/C/P/798/411/
>>
>> In above setup you get best of both of worlds:
>> - fully multi tenant virtual private server
>> - ability to run other editions in its own virtual private server
>> - total flexibility with start small, upgrade easy to bigger network
>>
>> You can of course run multi tenant without SERVERware, should your start
>> up budged be limited.
>>
>>
>>
>> Senad
>>
>> www.bicomsystems.com
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-biz mailing list
>> To UNSUBSCRIBE or update options visit:
>>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>>
>>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

[asterisk-biz] USB Conference Phone for 29.99

We are now doing a special promotional offer on a new USB Conference Phone.
This is guaranteed the ONLY USB Conference Phone available. We also accept
bulk order and for custom logo to be put on the phone.

For more info please email us back.

Feature:
1. Ideal for group conference, free internet call and music enjoyment.
2. Due to 48KHz sample rate, presenting CD-quality music and high fidelity
sound.
3. HI-FI amplifier and high-quality speaker.
4. Full-duplex conversation, crystal clear voice.
5. DSP built-in for echo cancellation and noise reduction.
6. Adjustable volume and mute control.
7. Convenient for private conversations with ear-phone.
8. Ideal for travel because of small size and light weight.
9. USB 1.0 & 2.0 compatible, No driver required.
10. Mac and PC compatible.
11. Supporting all softphone, like Skype, MSN, Yahoo messenger, AOL, Vonage
and VoIPBuster .
Hardware:
1. No external power required.
2. USB power and mute microphone LED indicator.
3. Volume+, volume-, mute speaker and microphone buttons.
4. Driver and sound card built-in.

Interface:
1. One USB interface to PC.
2. One Headset jack.
System requirement:
1. Windows 2000, XP or Vista .
2. 400 MHz processor and free USB1.1 or USB2.0 port .
3. 128 MB RAM and 15 MB free disk space.
4. Internet Connection (33.6 Kbps modem, or any broadband: cable, ADSL.)


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Starting a VOIP Business

I second the concerns regarding the stability of a WISP network.  However, it can be done correctly in a fashion that works.  I'm currently a customer of a WISP and I use voip all the time without quality issues.  We're using Canopy equipment and I go Office -> Tower 1 -> Tower 2 -> Tower 3 -> Wireless link to backhaul.  Believe it or not it works very well using either ULAW or G729.

 

Darren Wiebe

darren@aleph-com.net 

Thu Jan 31 2008 09:33:08 AM MST from Nitzan Kon to john.mason.jr@cox.net, Commercial and Business-Oriented Asterisk Discussion
Subject: Re: [asterisk-biz] Starting a VOIP Business

I was thinking the exact same thing. My experience (as a user) with
WISPs has been basically lost packets, intermittent service issues,
etc. VoIP is fragile as it is, so there is no way you could deliver
VoIP reliably with these issues...

If you DON'T have lost packet issues (rare for a WISP I think), your
latency is very low, and basically you have "the perfect connection"
for a WISP - you MIGHT be fine.

Don't go buying a bunch of equipment before you test it though...

-- Nitzan

--- John Mason Jr wrote:

> Just a word of advise make sure the network is ready for the voip
> traffic, at my ofice we had a very poor experience with a WISP with
> VOIP
> because the network was not ready & well managed
>
> John


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:
http://listsdigium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Starting a VOIP Business

Thanks Senad ! Looks like your maxirack solution will be a good start .
I saw on the picture that no card is provided ... Does it have a PCI
express port ? (the TE420 is PCI express).
I am downloading the vmware image to take a peek

Thanks

Gondar

Can we talk off-list ?


Senad Jordanovic wrote:
> Gondar Monn wrote:
>
>> Thanks for your willingness to help ......
>> @ Pilosov, we got the PRI lines + the TE420. We are now looking for the
>> best machine that could handle the supposedly 120 calls and maybe more
>> .... + the hosted PBX
>>
>> @Balashov, we are a WISP and provide internet access to remote areas, we
>> want to offer our subscribers phone services too. Either DID
>> origination or SIP phones, plus hosted PBX .... What other alternative
>> would you propose instead of Asterisk ? For billing, we would go for
>> monthly prepaid ...
>>
>> The main thing right now, is the server that would handle the
>> services... any suggestions ?
>>
>
> Hi
>
> We got exactly same type of business type running:
> - multi tenant PBXware:
> http://www.bicomsystems.com/products/C/P/798/154_3672/
>
> on top of high availability servers solution, SERVERware:
> http://www.bicomsystems.com/products/C/P/798/411/
>
> In above setup you get best of both of worlds:
> - fully multi tenant virtual private server
> - ability to run other editions in its own virtual private server
> - total flexibility with start small, upgrade easy to bigger network
>
> You can of course run multi tenant without SERVERware, should your start
> up budged be limited.
>
>
>
> Senad
>
> www.bicomsystems.com
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Starting a VOIP Business

I believe it can be done correctly, and would be interested in your
experiences as well, I was only trying to relay a poor experience I had,
and the idea that VOIP might make some otherwise unnoticeable networking
issues visible.

John

Mike Hammett wrote:
> As a WISP and VoIP operator myself I agree that those things cause issues,
> but not all WISPs are operated in that fashion. What percentage, I cannot
> say, but my network has less than 0.1% packet loss and end-end latency is
> almost always less than 10 ms, but usually less than 5 ms.
>
>
> ----------
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
>
> ----- Original Message -----
> From: "Nitzan Kon" <nk3569@yahoo.com>
> To: <john.mason.jr@cox.net>; "Commercial and Business-Oriented Asterisk
> Discussion" <asterisk-biz@lists.digium.com>
> Sent: Thursday, January 31, 2008 10:33 AM
> Subject: Re: [asterisk-biz] Starting a VOIP Business
>
>
>> I was thinking the exact same thing. My experience (as a user) with
>> WISPs has been basically lost packets, intermittent service issues,
>> etc. VoIP is fragile as it is, so there is no way you could deliver
>> VoIP reliably with these issues...
>>
>> If you DON'T have lost packet issues (rare for a WISP I think), your
>> latency is very low, and basically you have "the perfect connection"
>> for a WISP - you MIGHT be fine.
>>
>> Don't go buying a bunch of equipment before you test it though...
>>
>> -- Nitzan
>>
>> --- John Mason Jr <john.mason.jr@cox.net> wrote:
>>
>>> Just a word of advise make sure the network is ready for the voip
>>> traffic, at my ofice we had a very poor experience with a WISP with
>>> VOIP
>>> because the network was not ready & well managed
>>>
>>> John
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-biz mailing list
>> To UNSUBSCRIBE or update options visit:
>>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Starting a VOIP Business

Mike !
Can we get together (off-list) and share a bit ?

Thanks

Gondar


Mike Hammett wrote:
> As a WISP and VoIP operator myself I agree that those things cause issues,
> but not all WISPs are operated in that fashion. What percentage, I cannot
> say, but my network has less than 0.1% packet loss and end-end latency is
> almost always less than 10 ms, but usually less than 5 ms.
>
>
> ----------
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
>
> ----- Original Message -----
> From: "Nitzan Kon" <nk3569@yahoo.com>
> To: <john.mason.jr@cox.net>; "Commercial and Business-Oriented Asterisk
> Discussion" <asterisk-biz@lists.digium.com>
> Sent: Thursday, January 31, 2008 10:33 AM
> Subject: Re: [asterisk-biz] Starting a VOIP Business
>
>
>
>> I was thinking the exact same thing. My experience (as a user) with
>> WISPs has been basically lost packets, intermittent service issues,
>> etc. VoIP is fragile as it is, so there is no way you could deliver
>> VoIP reliably with these issues...
>>
>> If you DON'T have lost packet issues (rare for a WISP I think), your
>> latency is very low, and basically you have "the perfect connection"
>> for a WISP - you MIGHT be fine.
>>
>> Don't go buying a bunch of equipment before you test it though...
>>
>> -- Nitzan
>>
>> --- John Mason Jr <john.mason.jr@cox.net> wrote:
>>
>>
>>> Just a word of advise make sure the network is ready for the voip
>>> traffic, at my ofice we had a very poor experience with a WISP with
>>> VOIP
>>> because the network was not ready & well managed
>>>
>>> John
>>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-biz mailing list
>> To UNSUBSCRIBE or update options visit:
>>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>>
>>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Starting a VOIP Business

Thanks for a very wise advice ... we are actually looking into it, we
had a bridged system and are redesigning it to be fully routed +
implementing QoS + switching bandwidth providers to get a better
backbone ....

Thanks again

Gondar

Nitzan Kon wrote:
> I was thinking the exact same thing. My experience (as a user) with
> WISPs has been basically lost packets, intermittent service issues,
> etc. VoIP is fragile as it is, so there is no way you could deliver
> VoIP reliably with these issues...
>
> If you DON'T have lost packet issues (rare for a WISP I think), your
> latency is very low, and basically you have "the perfect connection"
> for a WISP - you MIGHT be fine.
>
> Don't go buying a bunch of equipment before you test it though...
>
> -- Nitzan
>
> --- John Mason Jr <john.mason.jr@cox.net> wrote:
>
>
>> Just a word of advise make sure the network is ready for the voip
>> traffic, at my ofice we had a very poor experience with a WISP with
>> VOIP
>> because the network was not ready & well managed
>>
>> John
>>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Reciprocal Compensation

I have both reciprocal compensation as well as 8xx termination access compensation. The applications on the reciprocal compensation could be things like call center/conference calling/chat line opportunities!

 

Regards,

 

Jay Kordic

The Horizon Group

Wholesale VOIP/TDM routes/Wholesale IP Bandwidth

1-951-744-9220

1-515-322-0273(fax)

MSN IM- Jaykordic@hotmail.com

 

January 2008 Featured products

1-       ALASKA TERMINATION as low as .013/minute

2-      USA 8xx termination-receive compensation on 8XX calls that my CLEC partner terminates for you

3-      USA termination offered with and without ANI delivery-ask me about the many carrier products available.

4-      Internet bandwidth from USA Tier 1 providers for Fast E/Gig E as low as $14/mb.

 

INCLUDES:

(wholesale 8XX/DID origination,USA Termination,A-Z termination,Country specific routes,8XX termination,CNAM dip fee compensation,Fast E,GIG-E,OCX Bandwidth).

 


From: asterisk-biz-bounces@lists.digium.com [mailto:asterisk-biz-bounces@lists.digium.com] On Behalf Of Jason Garland
Sent: Wednesday, January 30, 2008 7:54 PM
To: asterisk-biz@lists.digium.com
Subject: [asterisk-biz] Reciprocal Compensation

 

Anyone here providing kickbacks/commission on their reciprocal compensation? Contact me off list.

 


Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

[asterisk-biz] 2-port passive BRI card

Hi all,
 
I'm looking for an inexpensive 2 port passive BRI card. I am located in the UK and would appreciate any help on locating one.
 
Reggie

[asterisk-biz] VoIP Users Conference Friday Feb 1st @ 12 Noon EST: Hosted IVR

Our guest is tomorrow Mobeen Khan is Chief Operating Officer of
Metaphor Solutions who offer "Plug & Play IVR On-Demand"

http://www.metaphorivr.com


Instructions to join the conference: http://VoipUsersConference.org
IRC: freenode.net #voip-users-conference

The weekly Friday Noon "VoIP Users Conference" call was originally the
"Asterisk Users Conference" but for "unknown reasons", changed its
name and URL :)

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Starting a VOIP Business

As a WISP and VoIP operator myself I agree that those things cause issues,
but not all WISPs are operated in that fashion. What percentage, I cannot
say, but my network has less than 0.1% packet loss and end-end latency is
almost always less than 10 ms, but usually less than 5 ms.


----------
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com


----- Original Message -----
From: "Nitzan Kon" <nk3569@yahoo.com>
To: <john.mason.jr@cox.net>; "Commercial and Business-Oriented Asterisk
Discussion" <asterisk-biz@lists.digium.com>
Sent: Thursday, January 31, 2008 10:33 AM
Subject: Re: [asterisk-biz] Starting a VOIP Business


>I was thinking the exact same thing. My experience (as a user) with
> WISPs has been basically lost packets, intermittent service issues,
> etc. VoIP is fragile as it is, so there is no way you could deliver
> VoIP reliably with these issues...
>
> If you DON'T have lost packet issues (rare for a WISP I think), your
> latency is very low, and basically you have "the perfect connection"
> for a WISP - you MIGHT be fine.
>
> Don't go buying a bunch of equipment before you test it though...
>
> -- Nitzan
>
> --- John Mason Jr <john.mason.jr@cox.net> wrote:
>
>> Just a word of advise make sure the network is ready for the voip
>> traffic, at my ofice we had a very poor experience with a WISP with
>> VOIP
>> because the network was not ready & well managed
>>
>> John
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] desktop application like the outcall

Alexender Argov ha scritto:
> I'm looking for desktop application like the outcall.
> Can any one help with suggestions?

Why "outcall" is not good for you? Missing features?

Antonio

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Starting a VOIP Business

I was thinking the exact same thing. My experience (as a user) with
WISPs has been basically lost packets, intermittent service issues,
etc. VoIP is fragile as it is, so there is no way you could deliver
VoIP reliably with these issues...

If you DON'T have lost packet issues (rare for a WISP I think), your
latency is very low, and basically you have "the perfect connection"
for a WISP - you MIGHT be fine.

Don't go buying a bunch of equipment before you test it though...

-- Nitzan

--- John Mason Jr <john.mason.jr@cox.net> wrote:

> Just a word of advise make sure the network is ready for the voip
> traffic, at my ofice we had a very poor experience with a WISP with
> VOIP
> because the network was not ready & well managed
>
> John


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

[asterisk-biz] desktop application like the outcall

Hi

I'm looking for desktop application like the outcall.
Can any one help with suggestions?

Thank you
Alex


www.tikalnetworks.com
Alexander Argov CEO
Tel +972 (73) 2209100 Mobile 972-52-3682486
Fax +972 (73) 2209001
P.O.B 13317 Tel Aviv 61132
E-Mail: alex@tikalnetworks.com


<http://1186390.sigclick.mailinfo.com/sigclick/05030A04/070B054D/060B0A4E/06
14222425.jpg>

Re: [asterisk-biz] Starting a VOIP Business

Just a word of advise make sure the network is ready for the voip
traffic, at my ofice we had a very poor experience with a WISP with VOIP
because the network was not ready & well managed

John

Gondar Monn wrote:
> Thanks for your willingness to help ......
> @ Pilosov, we got the PRI lines + the TE420. We are now looking for the
> best machine that could handle the supposedly 120 calls and maybe more
> ... + the hosted PBX
>
> @Balashov, we are a WISP and provide internet access to remote areas, we
> want to offer our subscribers phone services too. Either DID
> origination or SIP phones, plus hosted PBX .... What other alternative
> would you propose instead of Asterisk ? For billing, we would go for
> monthly prepaid ...
>
> The main thing right now, is the server that would handle the
> services... any suggestions ?
>
> Thanks !
>
> Gondar
>
> PS: Got a spam from voicein@aol.com .. anyone knows /*Voice
> International ?*/
>
> Alex Pilosov wrote:
>> On Wed, 30 Jan 2008, Gondar Monn wrote:
>>
>>
>>> Have some PRI connections from a dying dialup business, would like to
>>> put them to good use... Just got a Digium TE420 and looking for a server
>>> that would do the job, and leave some room for more cards if needed.
>>> Initially bought a PowerEdge 2950 but got used for something else, can
>>> get another one if one thinks it is a good choice ... We might host PBX
>>> too ... Any suggestions ? Looking for a billing solution too ... Some
>>> recommendations ? Thanks for any input .....
>>>
>> Step 1: Buy TE420 and PE2950, buy some PRI lines
>> Step 2: ???
>> Step 3: Profit!
>>
>> -alex
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-biz mailing list
>> To UNSUBSCRIBE or update options visit:
>>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>>
>>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Starting a VOIP Business

Gondar,
You might want to look at our solution. We have 2 main offerings that you can see here http://flatplanetphone.com/wordpress/?p=459
But we are flexible. In fact we have actually just installed a full system for a WISP.

Please contact me if you need more details

Moshe Maeir
Chief Flattening Officer
The Flat Planet Phone Co.
moshe@flatplanetphone.com
http://www.flatplanetphone.com

Gondar Monn wrote:
Thanks for your willingness to help ...... @ Pilosov, we got the PRI lines + the TE420. We are now looking for the  best machine that could handle the supposedly 120 calls and maybe more  ... + the hosted PBX  @Balashov, we are a WISP and provide internet access to remote areas, we  want to offer our subscribers  phone services too. Either  DID  origination or SIP phones, plus hosted PBX .... What other alternative  would you propose instead of Asterisk ?  For billing, we would go for  monthly prepaid ...  The main thing right now, is the server that would handle the  services... any suggestions ?  Thanks !  Gondar  PS: Got a spam from voicein@aol.com .. anyone knows /*Voice  International ?*/  Alex Pilosov wrote:   
On Wed, 30 Jan 2008, Gondar Monn wrote:         
Have some PRI connections from a dying dialup business, would like to put them to good use... Just got a Digium TE420 and looking for a server that would do the job, and leave some room for more cards if needed.   Initially bought a PowerEdge 2950 but got used for something else, can get another one if one thinks it is a good choice ... We might host PBX too ... Any suggestions ? Looking for a billing solution too ... Some recommendations ? Thanks for any input .....            
Step 1: Buy TE420 and PE2950, buy some PRI lines Step 2: ??? Step 3: Profit!  -alex   _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com--  asterisk-biz mailing list To UNSUBSCRIBE or update options visit:    http://lists.digium.com/mailman/listinfo/asterisk-biz         
  _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com--  asterisk-biz mailing list To UNSUBSCRIBE or update options visit:    http://lists.digium.com/mailman/listinfo/asterisk-biz    

[asterisk-biz] Radvision Scopia MCU-12

Dear All,

Can someone help me about asterisk connect to Radvision Scopia MCU-12
when i dial from innomedia videophone dial to MCU i got one way voice.
i hear sound from MCU but can't say any thing.

When i use ip phone (no video) it's work.

if somone ever test asterisk with MCU please send me example config


Best Regards.

Dome C.

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Wednesday, January 30, 2008

Re: [asterisk-biz] Starting a VOIP Business

Gondar Monn wrote:
> Thanks for your willingness to help ......
> @ Pilosov, we got the PRI lines + the TE420. We are now looking for the
> best machine that could handle the supposedly 120 calls and maybe more
> .... + the hosted PBX
>
> @Balashov, we are a WISP and provide internet access to remote areas, we
> want to offer our subscribers phone services too. Either DID
> origination or SIP phones, plus hosted PBX .... What other alternative
> would you propose instead of Asterisk ? For billing, we would go for
> monthly prepaid ...
>
> The main thing right now, is the server that would handle the
> services... any suggestions ?

Hi

We got exactly same type of business type running:
- multi tenant PBXware:

http://www.bicomsystems.com/products/C/P/798/154_3672/

on top of high availability servers solution, SERVERware:
http://www.bicomsystems.com/products/C/P/798/411/

In above setup you get best of both of worlds:
- fully multi tenant virtual private server
- ability to run other editions in its own virtual private server
- total flexibility with start small, upgrade easy to bigger network

You can of course run multi tenant without SERVERware, should your start
up budged be limited.

Senad

www.bicomsystems.com


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] A RELIABLE SIP Termination Provider

Hi Dave!
 
Checkout Nufone. http://www.nufone.net/
I have used their service and find their service to be stable They do provide phone support along with email ticketing system. Once I was having trouble configuring their tollfree number in my asterisk box they help me over the phone and also configured it by remotely connecting to my box immediately.
 
I have been using them for outbound call center and found their service superb.
 
Thanks
 
Regards,
Muhammad Zulqarnain
Network/System Engineer
 
 


Thanks
Regards,

Muhammad Zulqarnain
Network / System Engineer
Punjab Information Technology Board (PITB)
15-C-1, Model Town, Lahore, Pakistan.
Cell: +92 (0)333 4218433
Tel: +92 42 9232121-9232147-8, 5843701-3
Fax: +92 42 9232123
MSN: zulqarnain@globalitvision.com
email: mzulqarnain@pitb.gov.pk


Looking for last minute shopping deals? Find them fast with Yahoo! Search.

Re: [asterisk-biz] Reciprocal Compensation

Mee too

On 1/30/08, Jason Garland <mortal42@yahoo.com> wrote:
> Anyone here providing kickbacks/commission on their reciprocal compensation?
> Contact me off list.
>
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it
> now.

--
Sent from Gmail for mobile | mobile.google.com

Rehan AllahWala
http://www.SuperTec.com - Tomorrow's Technology, Today.
http://www.didx.net - World's Biggest Number Trading Platform.

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

[asterisk-biz] Reciprocal Compensation

Anyone here providing kickbacks/commission on their reciprocal compensation? Contact me off list.


Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

Re: [asterisk-biz] Starting a VOIP Business

Thanks for your willingness to help ......
@ Pilosov, we got the PRI lines + the TE420. We are now looking for the
best machine that could handle the supposedly 120 calls and maybe more
... + the hosted PBX

@Balashov, we are a WISP and provide internet access to remote areas, we
want to offer our subscribers phone services too. Either DID
origination or SIP phones, plus hosted PBX .... What other alternative
would you propose instead of Asterisk ? For billing, we would go for
monthly prepaid ...

The main thing right now, is the server that would handle the
services... any suggestions ?

Thanks !

Gondar

PS: Got a spam from voicein@aol.com .. anyone knows /*Voice
International ?*/

Alex Pilosov wrote:
> On Wed, 30 Jan 2008, Gondar Monn wrote:
>
>
>> Have some PRI connections from a dying dialup business, would like to
>> put them to good use... Just got a Digium TE420 and looking for a server
>> that would do the job, and leave some room for more cards if needed.
>> Initially bought a PowerEdge 2950 but got used for something else, can
>> get another one if one thinks it is a good choice ... We might host PBX
>> too ... Any suggestions ? Looking for a billing solution too ... Some
>> recommendations ? Thanks for any input .....
>>
> Step 1: Buy TE420 and PE2950, buy some PRI lines
> Step 2: ???
> Step 3: Profit!
>
> -alex
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] A RELIABLE SIP Termination Provider

Unfortunately for you, VoIPJet is not SIP but IAX

2008/1/30, Seysan <AFShin9@gmail.com>:
> Hello,
>
> I'm working for EXSIR Communications.
>
> We have Phone Support, MSN, YAHOO! Support, and E-Mail. FREE of charge.
>
> Please let me know what destinations you are looking for.
>
> Regards,
>
> AFShin
> AFShin@EXSIR.com
> 505-349-0468
> www.EXSIR.com
>
>
>
> On Jan 29, 2008 8:25 PM, Dave Batchelor <dave@greenroomcreations.com> wrote:
>
> > We've been having a heck of a time finding a really reliable company to
> > provide us with SIP Termination. We only do outbound termination but
> > have been having trouble finding a really reliable company with actual
> > support. So far we've used rapidvox and voipjet but had some major
> > problems with calls not being connected, messages not being played, etc
> etc.
> >
> > It seems like every provider either only does email support, or has a
> > support phone number they don't answer. Are there any reputable
> > companies out there with support that is available consistently? We
> > don't mind paying a higher per minute charge to get a company that we
> > can actually talk to.
> >
> > Any help would be greatly appreciated.
> >
> > Dave
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-biz mailing list
> > To UNSUBSCRIBE or update options visit:
> >

http://lists.digium.com/mailman/listinfo/asterisk-biz
> >
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] Starting a VOIP Business

On Wed, 30 Jan 2008, Gondar Monn wrote:

> Have some PRI connections from a dying dialup business, would like to
> put them to good use... Just got a Digium TE420 and looking for a server
> that would do the job, and leave some room for more cards if needed.
> Initially bought a PowerEdge 2950 but got used for something else, can
> get another one if one thinks it is a good choice ... We might host PBX
> too ... Any suggestions ? Looking for a billing solution too ... Some
> recommendations ? Thanks for any input .....
Step 1: Buy TE420 and PE2950, buy some PRI lines
Step 2: ???
Step 3: Profit!

-alex


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

[asterisk-biz] Starting a VOIP Business

Have some PRI connections from a dying dialup business, would like to
put them to good use... Just got a Digium TE420 and looking for a server
that would do the job, and leave some room for more cards if needed.
Initially bought a PowerEdge 2950 but got used for something else, can
get another one if one thinks it is a good choice ... We might host PBX
too ...
Any suggestions ? Looking for a billing solution too ... Some
recommendations ?
Thanks for any input .....

Gondar


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] A RELIABLE SIP Termination Provider

Hello,

I'm working for EXSIR Communications.

We have Phone Support, MSN, YAHOO! Support, and E-Mail. FREE of charge.

Please let me know what destinations you are looking for.

Regards,

AFShin
AFShin@EXSIR.com
505-349-0468
www.EXSIR.com


On Jan 29, 2008 8:25 PM, Dave Batchelor <dave@greenroomcreations.com> wrote:
We've been having a heck of a time finding a really reliable company to
provide us with SIP Termination.  We only do outbound termination but
have been having trouble finding a really reliable company with actual
support.  So far we've used rapidvox and voipjet but had some major
problems with calls not being connected, messages not being played, etc etc.

It seems like every provider either only does email support, or has a
support phone number they don't answer.  Are there any reputable
companies out there with support that is available consistently?  We
don't mind paying a higher per minute charge to get a company that we
can actually talk to.

Any help would be greatly appreciated.

Dave

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-biz

[asterisk-biz] Consultants Needed

I'm interested in retaining (or hiring) experienced * developers for
development of a set of telephony applications, including:

- data driven IVR with voice recognition
- call routing, recording
- 800 number processing (routing/high volume).

Location is Los Angeles, but development can be offf-site. Need is
immediate.


Paul T. Ryan
Done Right!
paul@doneright.com
(626) 354-5856


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] A RELIABLE SIP Termination Provider

ChiliTech offers 24x7 emergency support for our VoIP wholesale customers who are doing any decent amount of termination.  You will ALWAYS get a warm body no matter when you call our emergency support number.  You can find out more about us at http://www.chilitech.net and http://www.chilitechdv.com

[asterisk-biz] Nepal direct Routes




Anyone with Direct routes to the following countries:
 
Nepal

    Sri lanka 
 
please send me your rates offline. thanks
 
Mario



[asterisk-biz] direct Routes

Anyone with Direct routes to the following countries:
Congo                            242
Congo DRC                    243
Cameroon                      237
 
please send me your rates offline.
 
Patrick.

Re: [asterisk-biz] A RELIABLE SIP Termination Provider

On Tuesday 29 January 2008 22:25, Dave Batchelor wrote:
> We've been having a heck of a time finding a really reliable company to
> provide us with SIP Termination. We only do outbound termination but
> have been having trouble finding a really reliable company with actual
> support. So far we've used rapidvox and voipjet but had some major
> problems with calls not being connected, messages not being played, etc
> etc.

We have been happy with Vitelity.

Ron


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Tuesday, January 29, 2008

Re: [asterisk-biz] A RELIABLE SIP Termination Provider

On Jan 30, 2008 4:25 AM, Dave Batchelor <dave@greenroomcreations.com> wrote:
> companies out there with support that is available consistently? We
> don't mind paying a higher per minute charge to get a company that we
> can actually talk to.

I have had good experience in this realm with Junction Networks,
Teliax and Voicepulse.

YMMV

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] A RELIABLE SIP Termination Provider

Hello Dave,

We can provide you with SIP termination to major destinations.

We can provide phone support, but you see, that brings in all the extra
cost as well.

Do respond to me off the list with your destinations and volume and we
can work out a deal for you.


Thanks & Regards,
Mitul Limbani,
Founder & CEO,
Enterux Solutions,
The Enterprise Linux Company (TM),
www.enterux.com

Quoting Dave Batchelor <dave@greenroomcreations.com>:

> We've been having a heck of a time finding a really reliable company to
> provide us with SIP Termination. We only do outbound termination but
> have been having trouble finding a really reliable company with actual
> support. So far we've used rapidvox and voipjet but had some major
> problems with calls not being connected, messages not being played, etc etc.
>
> It seems like every provider either only does email support, or has a
> support phone number they don't answer. Are there any reputable
> companies out there with support that is available consistently? We
> don't mind paying a higher per minute charge to get a company that we
> can actually talk to.
>
> Any help would be greatly appreciated.
>
> Dave
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>

http://lists.digium.com/mailman/listinfo/asterisk-biz
>


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

[asterisk-biz] A RELIABLE SIP Termination Provider

We've been having a heck of a time finding a really reliable company to
provide us with SIP Termination. We only do outbound termination but
have been having trouble finding a really reliable company with actual
support. So far we've used rapidvox and voipjet but had some major
problems with calls not being connected, messages not being played, etc etc.

It seems like every provider either only does email support, or has a
support phone number they don't answer. Are there any reputable
companies out there with support that is available consistently? We
don't mind paying a higher per minute charge to get a company that we
can actually talk to.

Any help would be greatly appreciated.

Dave

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

[asterisk-biz] Looking for DIDs for AU, NZ & UK



Looking for DiDs for Australia, New Zealand, and United Kingdom.
 
Toll free DiDs would be a plus.
 
Sent quotes via email
 
 
Thanks,
 
Charles Alvis
Internet Technology Group, Inc
Redmond, WA

Re: [asterisk-biz] asterisk-biz]RE: How to make TE220B work well?

I have a problem like this, but in this case with a tdm400p, after I finish a call it seems asterisk do not end the call so if i try immediately to make another call says that "....are busy now, try...later"


Regards!!!



2008/1/29 <sunxiujun26@sina.com>:
>On Mon, 2008-01-28 at 18:59 +0800, sunxiujun26 at sina.com wrote:
>> I used trixbox 1.2.3 with a E1 card(not digium).The call often disconnected,and the echo is great.
>> Recently, I bought a E1 card from digium --TE220B. It can not work on trixbox 1.2.3. The &quot;te200series-user-manual&quot; says the card need asterisk 1.2.20 or newer and zaptel 1.2.20 or newer, so I update trixbox1.2.3(asterisk 1.2.12 and zaptel 1.2.9) to trixbox 2.2 (asterisk 1.2.24 and zaptel 1.2.21).But the disconnected rate increased much,the sip_phone can not be used.
>> I don't know if I chose a wrong release ,or I don't use the card correctly. I want somebody can give me some clews.
>> Thank you in advance!

>Do you have callprogress=yes and/or busydetect=yes in your zapata.conf
file? If so, turn those settings off for your E1 channels. They're the
most likely cause for disconnects during a call.

>--
>Jared Smith
>Community Relations Manager
>Digium, Inc.

Jared Smith,
   I am glad to hear from you .
   I have set callprogress=no and busydetect=no already.

best wishes!

 sun xiujun



-------------------------------------------------------------------
价格服务都要!中小企业如何选商用电脑( http://d1.sina.com.cn/sina/limeng3/mail_zhuiyu/2008/mail_zhuiyu_20080128.html )

===================================================================
还没买到票吗?新浪票务互助平台,帮你搞定!(http://bbs.bj.sina.com.cn/tableforum/App/index.php?bbsid=143&subid=0&ismain=1
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-biz



--
Franklin Almonte
CabiNet Telecomunicaciones
VoIp Consultores
Tel. 809-533-8011
Cel. 809-224-8551
Santo Domingo, Republica Dominicana
msn:falmonte@hotmail.com

Este E-mail y cualquier archivo adjunto pueden contener la información confidencial y privilegiada. Si no eres el recipiente previsto, notificar por favor el remitente inmediatamente por el E-mail de vuelta, suprimir este E-mail y destruir cualquier copia. Cualquier difusión o uso de esta información de una persona con excepción del recipiente previsto es desautorizado y puede ser ilegal.


-This e-mail and any attachments may contain confidential and privileged information. If you are not the intended recipient, please notify the sender immediately by return e-mail, delete this e-mail and destroy any copies. Any dissemination or use of this information by a person other than the intended recipient is unauthorized and may be illegal.

[asterisk-biz] asterisk-biz]RE: How to make TE220B work well?

>On Mon, 2008-01-28 at 18:59 +0800, sunxiujun26 at sina.com wrote:
>> I used trixbox 1.2.3 with a E1 card(not digium).The call often disconnected,and the echo is great.
>> Recently, I bought a E1 card from digium --TE220B. It can not work on trixbox 1.2.3. The &quot;te200series-user-manual&quot; says the card need asterisk 1.2.20 or newer and zaptel 1.2.20 or newer, so I update trixbox1.2.3(asterisk 1.2.12 and zaptel 1.2.9) to trixbox 2.2 (asterisk 1.2.24 and zaptel 1.2.21).But the disconnected rate increased much,the sip_phone can not be used.
>> I don't know if I chose a wrong release ,or I don't use the card correctly. I want somebody can give me some clews.
>> Thank you in advance!

>Do you have callprogress=yes and/or busydetect=yes in your zapata.conf
file? If so, turn those settings off for your E1 channels. They're the
most likely cause for disconnects during a call.

>--
>Jared Smith
>Community Relations Manager
>Digium, Inc.

Jared Smith,
I am glad to hear from you .
I have set callprogress=no and busydetect=no already.

best wishes!

sun xiujun


-------------------------------------------------------------------
价格服务都要!中小企业如何选商用电脑( http://d1.sina.com.cn/sina/limeng3/mail_zhuiyu/2008/mail_zhuiyu_20080128.html )

===================================================================
还没买到票吗?新浪票务互助平台,帮你搞定!(http://bbs.bj.sina.com.cn/tableforum/App/index.php?bbsid=143&subid=0&ismain=1)
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz

Re: [asterisk-biz] How to make TE220B work well?

>On Mon, 2008-01-28 at 18:59 +0800, sunxiujun26 at sina.com wrote:
>> I used trixbox 1.2.3 with a E1 card(not digium).The call often disconnected,and the echo is great.
>> Recently, I bought a E1 card from digium --TE220B. It can not work on trixbox 1.2.3. The "te200series-user-manual" says the card need asterisk 1.2.20 or newer and zaptel 1.2.20 or newer, so I update trixbox1.2.3(asterisk 1.2.12 and zaptel 1.2.9) to trixbox 2.2 (asterisk 1.2.24 and zaptel 1.2.21).But the disconnected rate increased much,the sip_phone can not be used.
>> I don't know if I chose a wrong release ,or I don't use the card correctly. I want somebody can give me some clews.
>> Thank you in advance!

>Do you have callprogress=yes and/or busydetect=yes in your zapata.conf
file? If so, turn those settings off for your E1 channels. They're the
most likely cause for disconnects during a call.

>--
>Jared Smith
>Community Relations Manager
>Digium, Inc.


I have set callprogress=no and busydetect=no already.


-------------------------------------------------------------------
价格服务都要!中小企业如何选商用电脑( http://d1.sina.com.cn/sina/limeng3/mail_zhuiyu/2008/mail_zhuiyu_20080128.html )

===================================================================
还没买到票吗?新浪票务互助平台,帮你搞定!(http://bbs.bj.sina.com.cn/tableforum/App/index.php?bbsid=143&subid=0&ismain=1)
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-biz